Special Reversing Rear View Camera for Nissan Tiida
This is a high quality waterproof rear view camera with CCD sensor, specifically designed to fit the standard license plate light on an Nissan Tiida Vehicle. It is also available with Wi-Fi wireless modules (optional) so that you don't have to install wires throughout the car.
Installation:
- Take out your stock license plate light at the back of your car.
- Fix the camera to where the stock license plate light was.
- Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power.
- Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative
- Connect the video cable to the monitor/rear camera input on the Multimedia interface or the optional Wi-Fi module.
Package includes:
- 1 x Nissan Tiida Color (night vision) rear view camera
- 1 x 6m video cable extension cord
- 1 x 1.2m power cable
Specifications are as follows:
- Certification: CE
- Image device: MT9V136 CCD Sensor
- TV system:PAL/NTSC
- Resolution: 480 TV lines
- Effective pixels: 720*576/480 pixels
- Sensing area: 3.584 mm *2.688 mm
- Shutter speed: 1-1/10000
- Video output: 1.0 VP-P,75 OHM
- Gamma consumption: 0.45
- White balance:auto
- Scanning system: 2:1 interlace
- Lens angle: 135°/170°
- Waterproof: IP67/68
- Minimum illumination: 0.01 Lux/F=1.2(0 Lux with IR on)
- Power supply: DC 12V
- Operation temperature:-20℃ - 75℃,RH 95% MAX
- Storage temperature:-40℃ - 85℃,RH 95% MAX