ATOTODouble DIN
ATOTO A5LG209T-S01
- Screen
- 9"
- OS
- Android
- CarPlay
- Yes
- Android Auto
- Yes
- RAM/ROM
- 2GB+32GB
- Price
- ~$186.9
Double DIN Head Units That Fit the Chevrolet Spark
Swapping the radio in a Chevrolet Spark is one of the easier upgrades in car audio: standard double DIN opening, plug-in harness adapters, and dash kits that make the result look stock. Start with one of the universal units below, then grab the install parts listed under it.
Some links on this page are affiliate links — see our affiliate disclosure.
Fit type: standard double DIN + dash kit. We don't currently list a custom-molded unit for the Spark; the proven route is a universal double DIN stereo with a Spark-specific dash installation kit (listed under “What else you need” below).
Universal double DIN units for the Chevrolet Spark
XTRONSCustom fit
Jeep/Dodge/Chrysler Android 14 Octa Core 4GB RAM & 64GB ROM Global 4G LTE
- Screen
- 5"
- OS
- Android 14
- CarPlay
- Yes
- Android Auto
- Yes
- RAM/ROM
- 4GB RAM / 64GB ROM
- Price
- ~$209.99
XTRONSCustom fit
Volkswagen / SEAT / SKODA | Android OS | Octa Core | 4GB RAM & 64GB ROM | IPS Screen | ID70MTVL
- Screen
- 7"
- OS
- Android
- CarPlay
- Yes
- Android Auto
- Yes
- RAM/ROM
- 4GB RAM & 64GB ROM
- Price
- ~$169.99
XTRONSCustom fit
XTRONS IMH94MTVL
- Screen
- 9"
- OS
- Android 14
- CarPlay
- Yes
- Android Auto
- Yes
- RAM/ROM
- 8GB RAM + 128GB ROM
- Price
- ~$389.99
ATOTODouble DIN
12.95" QLED AI Android Single Din & Double Din Car Stereo X10G129E
- Screen
- 12.95"
- OS
- Android 13
- CarPlay
- Yes
- Android Auto
- Yes
- RAM/ROM
- 8GB+128GB
- Price
- ~$833.9
What else you need for the install
A universal unit becomes a factory-look install with the right supporting parts. For the Chevrolet Spark that means:
- Dash installation kitessentialShop on Amazon
Adapts a standard double DIN chassis to the Chevrolet Spark dash opening for a factory-look fit.
- Wiring harness adapteressentialShop on Amazon
Plugs between the new stereo and the factory Chevrolet connector — no cutting the car's wiring.
- Radio antenna adapteressentialShop on Amazon
Connects the factory Chevrolet antenna plug to the standard motorola jack most aftermarket units use.
- Steering wheel control interfaceShop on Amazon
Keeps your steering wheel volume and track buttons working with the new unit.
- Backup cameraShop on Amazon
Nearly every unit here has a rear camera input — adding a camera during the install costs little extra effort.
Chevrolet Spark head unit FAQ
Will a double DIN head unit fit my Chevrolet Spark?
Yes — the Chevrolet Spark takes a standard double DIN (4-inch tall) chassis with the correct dash installation kit. The kit fills the factory opening so the new stereo looks factory-installed.
Do I need a dash kit for a Chevrolet Spark stereo upgrade?
Yes — a vehicle-specific dash kit is the one part you shouldn't skip. It adapts the Spark dash opening to the standard double DIN chassis and usually costs $15–$50.
Will I keep my steering wheel controls in the Spark?
In most cases yes, with a steering wheel control interface module wired between the car and the new unit. Budget roughly $30–$60 for it.
What screen sizes are available for the Chevrolet Spark?
Units listed for the Chevrolet Spark come with 5", 7", 9", 12.95" displays. Larger screens on custom-fit units are shaped to the dash, so a bigger display doesn't necessarily mean cutting or trimming.
Can I install a head unit in the Spark myself?
A Spark head unit swap is a common DIY job: trim removal tools, a screwdriver set, and 1–2 hours are typically enough. The wiring is plug-in when you use the right harness adapter and dash kit. If you're not comfortable removing dash trim, any car audio shop can do the physical install for a modest fee.