Double DIN Head Units That Fit the Kia Telluride

The Kia Telluride uses a standard double DIN opening, which is good news: it means nearly any 4-inch-tall aftermarket head unit fits, as long as you pair it with the right dash kit for the Telluride. Below are solid universal double DIN units, followed by the exact install parts the swap needs.

Some links on this page are affiliate links — see our affiliate disclosure.

Fit type: standard double DIN + dash kit. We don't currently list a custom-molded unit for the Telluride; the proven route is a universal double DIN stereo with a Telluride-specific dash installation kit (listed under “What else you need” below).

Universal double DIN units for the Kia Telluride

DasaitaDouble DIN

Dasaita Android13 Car Stereo for Universal 2 Din 11.6" Wireless Carplay & Android Auto

Screen
11.6"
OS
Android 13
CarPlay
Yes
Android Auto
Yes
RAM/ROM
6G+64G
Price
~$439.2
Check price on AmazonManufacturer page

What else you need for the install

A universal unit becomes a factory-look install with the right supporting parts. For the Kia Telluride that means:

Diagram of a complete double DIN installation. Mechanically: dash opening, then dash kit brackets, then the head unit, then the trim facade. Electrically: the factory radio plug, antenna plug, steering wheel buttons and reverse signal each reach the radio through their own vehicle-specific adapter.

Open the diagram full size

The head unit is the generic part. Everything that makes it fit aKia Telluride is in the middle column.
  • Dash installation kitessential

    Adapts a standard double DIN chassis to the Kia Telluride dash opening for a factory-look fit.

    Shop on Amazon
  • Wiring harness adapteressential

    Plugs between the new stereo and the factory Kia connector — no cutting the car's wiring.

    Shop on Amazon
  • Radio antenna adapteressential

    Connects the factory Kia antenna plug to the standard motorola jack most aftermarket units use.

    Shop on Amazon
  • Steering wheel control interface

    Keeps your steering wheel volume and track buttons working with the new unit.

    Shop on Amazon
  • Backup camera

    Nearly every unit here has a rear camera input — adding a camera during the install costs little extra effort.

    Shop on Amazon

Kia Telluride head unit FAQ

Will a double DIN head unit fit my Kia Telluride?

Yes — the Kia Telluride takes a standard double DIN (4-inch tall) chassis with the correct dash installation kit. The kit fills the factory opening so the new stereo looks factory-installed.

Do I need a dash kit for a Kia Telluride stereo upgrade?

Yes — a vehicle-specific dash kit is the one part you shouldn't skip. It adapts the Telluride dash opening to the standard double DIN chassis and usually costs $15–$50.

Will I keep my steering wheel controls in the Telluride?

In most cases yes, with a steering wheel control interface module wired between the car and the new unit. Budget roughly $30–$60 for it.

What screen sizes are available for the Kia Telluride?

Units listed for the Kia Telluride come with 7", 9", 11.6" displays. Larger screens on custom-fit units are shaped to the dash, so a bigger display doesn't necessarily mean cutting or trimming.

Can I install a head unit in the Telluride myself?

A Telluride head unit swap is a common DIY job: trim removal tools, a screwdriver set, and 1–2 hours are typically enough. The wiring is plug-in when you use the right harness adapter and dash kit. If you're not comfortable removing dash trim, any car audio shop can do the physical install for a modest fee.

← All Kia modelsSearch another vehicle