Dasaita 12.3" 2K Android 13 Stereo
- Screen
- 12.3"
- OS
- Android 13
- CarPlay
- Yes
- Android Auto
- Yes
- RAM/ROM
- 8GB+256GB
- Price
- ~$648
The Corolla is well served by the aftermarket: below are 11 head units built specifically for the Toyota Corolla dash. Because each one is shaped to the factory opening, you skip the dash kit entirely and keep a clean, original look.
Some links on this page are affiliate links — see our affiliate disclosure.
These units are sold for the Corolla without an explicit year range — open the manufacturer page and confirm your model year before ordering.
Custom-fit units need less supporting hardware than universal ones, but a few parts are still worth checking before install day:
Most custom-fit units ship with a plug-in harness for this vehicle — check the listing; a spare harness saves an install day if yours differs by trim.
Connects the factory Toyota antenna plug to the standard motorola jack most aftermarket units use.
Many custom-fit units retain steering wheel controls via a bundled CAN-bus box — verify before buying a separate interface.
Nearly every unit here has a rear camera input — adding a camera during the install costs little extra effort.
Yes. The units listed on this page are custom-fit designs made for the Toyota Corolla (2000–2022 model years): the screen and surround are shaped for the Corolla dash, so no generic dash kit is needed.
Usually not. Custom-fit units for the Corolla include a fascia shaped for the factory opening. You'd only need a dash kit if you instead installed a generic double DIN unit.
Most custom-fit Android units for the Corolla ship with (or support) a CAN-bus decoder that retains steering wheel controls. Confirm the listing mentions your model year before ordering.
Units listed for the Toyota Corolla come with 7", 9", 9.5", 10.2", 10.33", 12.3" displays. Larger screens on custom-fit units are shaped to the dash, so a bigger display doesn't necessarily mean cutting or trimming.
A Corolla head unit swap is a common DIY job: trim removal tools, a screwdriver set, and 1–2 hours are typically enough. The wiring is plug-in when you use the right harness (bundled with most custom-fit units). If you're not comfortable removing dash trim, any car audio shop can do the physical install for a modest fee.